MSA Confined Space Entry Kit
July 26, 2023
EXTECH AN100 CFM/CMM Mini Thermo-Anemometer
July 26, 2023
MSA IR5500 Open Path Infrared Gas Detector
The IR5500 is an open path infrared (IR) gas detector that continuously monitors for flammable gas leaks over large open areas. It monitors in both the LEL-m and ppm-m ranges to detect both small and large leaks. The IR5500 offers the benefits of early detection with its high sensitivity to gas concentrations at the ppm levels. This feature allows it to alarm faster than an LEL-only detector. Digital display and adjustable mounting arms ensure easy alignment. Factory calibrated for low-maintenance operation.
- Sensitive to both small (ppm.meter) and large (LEL.meter) gas leaks using dual detection ranges
- Ideal for use in harsh environments (-55°C)
- Single detection beam improves accuracy and reduces drift
- Continuous self-check for fail-to-safe operation
- Multiple communication outputs (HART, Modbus, AMS support) provide complete status and control capability in the control room
- Unitized display makes it easy to operate
- Automatic gain control compensates for dirty optics, rain, and fog.
Related products
-
MSA 9010/9020 LCD
Advanced design and innovative features make the 9010 and 9020 Controllers the top choice for gas-warning systems, monitoring up to 20 channels. The 9010 Controller operates with one independent sensor, while the 9020 operates with two independent sensors per control module. Each module comes with an independent AC/DC power supply for increased system reliability. Both units feature full internal diagnostics, which minimize false alarms and unexpected down time. The controllers can also power remote sensors, while the large four-digit LCD and LED provide such crucial information as gas concentration, alarm status and more. A convenient RS-485 serial interface offers handy printer connection to make a record of data, while a customized transmission protocol Modbus RTU can record serial bus data transmission such as system configuration, gas concentration, alarm and failure events.
-
Detnov DOTD-230 Conventional optical and heat detector
Conventional optical and heat detector. Led status indicator and output for remote pilot indicator PAD-10. White color. Allows installation without polarity. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificate EN 54-5 and EN 54-7. Dimensions: 100 x 40 mm.
-
Detnov DOD-220A Addressable optical smoke detector
Addressable optical smoke detector, with dirt compensation and algorithm verification. Led status indicator and output for remote pilot indicator PAD-10 or buzzer BUD-200. White color. Allows installation without polarity. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificate EN 54-7. Dimensions: 100 x 40 mm.
Reviews
There are no reviews yet.